Twist-off/lug Cap Full-auto Line (100-150pcs/min)

Short Description:

This line is used for producing metal twist off caps (lug caps),it has advantages of high level,stable performance and easy operation.It also can produce tin screw cap and SKO cap after restructuring.
Product type: three-jawed,four-jawed and six-jawed twist off caps
Production capacity: 100-150pcs / minute
Total power: 39KW
Total weight: 13800kgs

Product Detail

Product Tags

NCP-008A Full automatic NC punch (35T)

1.NCP-008A Full automatic NC punch (35T)

Technical Parameter:
(1).NC working table
Max. speed of arm and clamp: 36m/min
Feed precision: ±0.1mm
Working voltage: ~380V    50HZ
Rated power: 2KW
Outline size (L×W×H)(NC unit): 1740×2340×1045mm
Weight (NC unit): 1200kg

(2). Plate feeding table
Material Size: Width <950mm; Length 500mm
Lifting speed: 1.35m/min
Feeding speed: 12m/min
Power of complete set: 0.85KW
Outline size (L×W×H): 2900×2000×1650mm
Weight of complete set: ~600kg

(3). 35T press
Nominal pressure: 350KN
Slide block travel distance: 100mm
Number of times of travel: 100-120Times/minute
Power: 4KW
Outline size (L×W×H): 1660*1340*2360mm
Weight: 5000Kg

Particularly designed to produce can covers and stretch can’s bodies which consists of the units of NC table, automatic punch, automatic supplier. All working procedures are controlled by PLC.

GT2A8A Twist off cap making & injecting machine 

Technical Parameter
Cap dimensions (mm): 3-jaw, 4-jaw and 6-jaw; Φ30~Φ103
Capacity: 120caps/min at most by means of frequency modulation
Outline size (L×W×H): 1580×1260×1680mm
Main motor: Y90L-6   N=3KW, main transmission
Side motor: YS7124   N=370W, screw cap transmitted
Side motor: YS7124   N=370W, convey transmitted
Weight: 2000Kg

2. 2A8A Twist-off cap making&injecting machine

The twist off cap making&injecting machine is used for cap shaping and PVC injecting, then send the injected caps into the dryer for drying by convey line.

ENP100B Natural gas dryer

3 ENP100A Dryer

Technical Parameter:
Heating power: 28KW
Transfers power: 750W
Fan power: 1.5KW×2
Maximum temperature: 280℃
Size of drying tunnel (L×W×H) : 3600×940×100mm
Dimensions (L×W×H): 6000×1270×2800mm
Weight: 1500kg
This machine is used for drying of PVC injected into cap.

CTE150 Counter 

Technical Parameter:
Production capacity: 100-750pcs/minute
Motor power: 0.37KW
Size: 1800*550*1500mm
Weight: 200kgs
This machine which is available for counting the dried caps is used to count the caps, and transfer the counted caps into the carton for packing.

4 CTE150 Counter

  • Previous:
  • Next: